SMOK MICO 26W Pod System Electronic Cigarette
The SMOK MICO 26W pod e-cigarette model, which is produced with a flat body for easy carrying in the pocket or in the eyes of the bags, is very similar to the SMOK Rolo Badge model in terms of design features. In addition, the SMOK MICO pod system electronic cigarette model is also known as "ultra portable", which is produced flat for easy carrying in the pocket. Pod devices are recommended for use with liquid only.
The SMOK MICO Pod can be operated between a minimum of 10W and a maximum of 26W. In addition, the device can be operated with a 0.6 ohm or 2.0 ohm resistor. In this respect, the device can be operated with sub-ohm / sub-ohm and give intensive steam and provide an MTL / smoking experience.
The liquid reservoir in the SMOK MICO Pod cartridge is 1.7 ML and can be refilled if desired. Produced using zinc material, the device can be switched off automatically after 8 seconds of continuous operation. In addition, user-friendly features such as short circuit, overcharging, undervoltage protection are among the important features of the SMOK MICO Pod. The device provides 3.3 - 4.2 Volt current output. In addition to the coil structures that come out of the box contents, they can also be easily used with the coil structures sold.
0.8 Ohm Resistance MICO Coil Loaded Cartridge comes out of the box contents and is offered to consumers for sub - ohm use.
1.0 Ohm Resistance MICO Coil "Regular Coil" Loaded Cartridge, Ideal for MTL (smoking).
1.4 Ohm MICO Coil is sold separately.
SMOK MICO 26W Pod System Contents:
1 x MICO Pod System Battery Housing
1 x 0.8ohm MICO Mesh Pod Cartridge (For Sub - Ohm)
1 x 1.0ohm MICO Regular Pod
1 x Keychain Tie
1 x Micro USB Charging Cable
1 x Instruction Manual (English)
SMOK MICO 26W Pod System Features:
SMOK MICO 26W is an Extremely Small Pod System E-Cigarette Model: 53 mm Length x 46.5 mm Width x 14.8 mm Width. Moreover, SMOK MICO weighs only 65 grams.
SMOK MICO has a fixed battery of 700 mAH. The battery can be easily recharged thanks to the micro USB port on the housing.
The device can be operated between 10W and 26W. Voltage Output is between 3.3 - 4.2 VOlt.
MICO Pod can be used with 0.6 Ohm - 2.0 Ohm Resistor. You should push the surface of the device gently for steam production. ,
MICO Pod, which can give more dense steam thanks to adjustable air ducts, has functional features such as short circuit protection, low voltage protection and 8 seconds ignition protection.